Ⅱ型膠原交聯羧基端肽(CTXⅡ)多克隆抗體
如果您對該產品感興趣的話,可以
產品名稱: Ⅱ型膠原交聯羧基端肽(CTXⅡ)多克隆抗體
產品型號: CTXⅡ
產品展商: HZbscience
產品文檔: 無相關文檔
簡單介紹
Ⅱ型膠原交聯羧基端肽(CTXⅡ)多克隆抗體是針對CTXII的兔多克隆抗體。在**組織化學染色和**印跡實驗中能識別CTXII。Ⅱ型膠原交聯羧基端肽(CTXⅡ)多克隆抗體豐富產品組合，其中包括超過 42,000 多種高品質抗體，并配套提供種類齊全的抗體相關產品。 我們的抗體測定結果經全球上千次的引用驗證，有助于您在一系列抗體應用中獲得優異的實驗結果。
Ⅱ型膠原交聯羧基端肽(CTXⅡ)多克隆抗體
的詳細介紹
Ⅱ型膠原交聯羧基端肽(CTXⅡ)多克隆抗體
-
來源多抗制備
-
宿主兔
-
效價-
-
Ig類型IgG
-
純化方式抗原特異性親和純化
-
Ⅱ型膠原交聯羧基端肽(CTXⅡ)多克隆抗體標記物無標記物
-
緩沖液成份磷酸鹽緩沖液（pH7.4,含有0.02% NaN3和50%甘油）
-
性狀液體
-
濃度200ug/ml
-
且適物種-
-
應用WB; ICC; IHC-P; IHC-F; ELISA; IP; IF; FCM.
-
Ⅱ型膠原交聯羧基端肽(CTXⅡ)多克隆抗體Polyclonal Antibody to Cross Linked C-Telopeptide Of Type II Collagen (CTXII)
Organism Species: Homo sapiens (Human)
Instruction manual
FOR IN VITRO USE AND RESEARCH USE ONLY
NOT FOR USE IN CLINICAL DIAGNOSTIC PROCEDURES
11th Edition (Revised in May, 2016)
[ PROPERTIES ]
Source: Polyclonal antibody preparation
Host: Rabbit
Purification: Antigen-specific Affinity Chromatography. Traits: Liquid
Concentration: 200μg/mL
UOM: 100μg
Applications: WB; ICC; IHC-P; IHC-F; ELISA; IP; IF; FCM. Ⅱ型膠原交聯羧基端肽(CTXⅡ)多克隆抗體[ IMMUNOGEN ]
Immunogen: Synthetic Peptide, CTXII conjugated to OVA
Accession No.: CPA686Hu21
Sequence: The target peptide sequence is listed below. EKGPDPLQYMRA
[ APPLICATIONS ]
Western blotting: 0.5-2ug/ml
Immunocytochemistry in formalin fixed cells: 5-20ug/ml
Immunohistochemistry in formalin fixed frozen section: 5-20ug/ml
Immunohistochemistry in paraffin section: 5-20ug/ml
Enzyme-linked Immunosorbent Assay: 0.05-2ug/ml
Optimal working dilutions must be determined by end user. [ FORMULATION ]
Form & Buffer: Supplied as solution form in PBS, pH7.4, containing 0.02% NaN3,
50% glycerol. Ⅱ型膠原交聯羧基端肽(CTXⅡ)多克隆抗體[ STORAGE AND STABILITY ]
Storage: Avoid repeated freeze/thaw cycles. Store at 4
oC for frequent use. Aliquot and store at -20
oC for 12 months. Stability Test: The thermal stability is described by the loss rate. The loss rate
was determined by accelerated thermal degradation test, that is, incubate the
protein at 37
oC for 48h, and no obvious degradation and precipitation were
observed.The loss rate is less than 5% within the expiration date under
appropriate storage condition.
